What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Industrial Food Exposure Duration

Started by , Jun 06 2024 06:47 AM
4 Replies

Greetings to IFSQN community!

 

I need some help regarding the duration exposure of food snacks (moisture content <3%) which not yet/delayed being packed. 

 

I believe many of us understand that for the food industries which has GMP certification has hygienic zoning which the condition inside the area is controlled by good sanitation and the air is controlled by filter. So in mass production, there will be a chance that the product will be  delayed packed or production hold due to some maintenance issue. Then what would be the status for the exposed product which are pending to be pack. 

 

I understand of the danger temperature zone usually food need to be discarded after around 2 to 4 hours food exposure (under 4 to 60 degree celcius) but not clear if this also applicable to controlled area. 

 

So I need someone to provide explanation on this topic with the reference (if possible). 

 

Thank you in advance.

Share this Topic
Topics you might be interested in
Temperature Validation of Industrial Coffee Roaster Anyone use an industrial vacuum for dry cleaning in your facility? MPI Magnet | Industrial Magnets Request Guidelines for Setting Up an Industrial Bakery Facility Software to manage Corrective Action Program and industrial safety
[Ad]

hi :) 

 

Can you describe your product? seems like ambient, low risk. 

 

;)

With a moisture that low is it also RTE or shelf stable?

 

We have a product with shelf stable chemistry that is RTE and which is limited to 48 hours of exposure after lethality before it has to be packed, for quality reasons primarily.  It is still covered in containers during that time frame, but ambient air carries enough spoilage micros to encourage a limit outside hermetic packaging.

hi :) 

 

Can you describe your product? seems like ambient, low risk. 

 

;)

Hi. We have few product: RTE snack, biscuits, potato based product. Yes it is low risk but even it is low risk, it is acceptable to use after many hours? (e.g. 12hours). Do you have any reference of this kind of situation.

 

Thanks

With a moisture that low is it also RTE or shelf stable?

 

We have a product with shelf stable chemistry that is RTE and which is limited to 48 hours of exposure after lethality before it has to be packed, for quality reasons primarily.  It is still covered in containers during that time frame, but ambient air carries enough spoilage micros to encourage a limit outside hermetic packaging.

Yes it is RTE and also shelf stable but dont 48 hours seems too long? But if covered maybe it is acceptable. My situation is not covered and usually problem arise maybe can be settled around few hours.


Similar Discussion Topics
Temperature Validation of Industrial Coffee Roaster Anyone use an industrial vacuum for dry cleaning in your facility? MPI Magnet | Industrial Magnets Request Guidelines for Setting Up an Industrial Bakery Facility Software to manage Corrective Action Program and industrial safety Please provide food poisoning protocol in industrial catering Induction heating and safe operations in the industrial workplace Any tips on super industrial large read digital thermometer probes? Heavy Metals Limit Standard for Industrial Chemicals Food safety policy for a industrial catering company