Best Answer kingstudruler1, 25 April 2022 - 06:45 PM
bunting and eriez seem to be the most common magnets that i have seen. I am not sure if they are Neodymium, but they have rare earth and ultra rare earth options.
Best Answer kingstudruler1, 25 April 2022 - 06:45 PM
bunting and eriez seem to be the most common magnets that i have seen. I am not sure if they are Neodymium, but they have rare earth and ultra rare earth options.
Posted 25 April 2022 - 03:51 PM
I am looking for a U.S. based magnet supplier.
We are looking to add an additional Neodymium magnet to our process and I would like to get one from the U.S. Our current magnet was purchased from Europe because that's what I was able to find with Google. I think it would be easier and faster if I was able to source one domestically this time.
Thank you in advance!
Posted 25 April 2022 - 06:45 PM Best Answer
bunting and eriez seem to be the most common magnets that i have seen. I am not sure if they are Neodymium, but they have rare earth and ultra rare earth options.
Edited by kingstudruler1, 25 April 2022 - 06:46 PM.
Twofishfs@gmail.com
Thanked by 1 Member:
|
|
Thanked by 1 Member:
|
|
Thanked by 1 Member:
|
|
Posted 02 May 2022 - 08:40 PM
bunting and eriez seem to be the most common magnets that i have seen. I am not sure if they are Neodymium, but they have rare earth and ultra rare earth options.
Turns out there is an Eriez sales rep who lives in the same town as our factory. Thanks for the suggestion!
Food Safety Topics →
Documentation & Document Control →
Looking for a magnet cleaning procedureStarted by lusein, 31 Dec 2019 magnet |
|
||
Food Safety Topics →
Foreign Body Prevention →
Using magnets with conveyor beltsStarted by Churu_Laural, 19 Mar 2019 magnet, verification, cleaning and 2 more... |
|
||
Government Regulatory →
FDA - U.S. Food and Drug Administration →
Government regulation (CFIA and FDA) on the magnet strength?Started by hadtoregister, 26 Oct 2018 magnet, safety, food safety and 3 more... |
|
||
Food Safety Topics →
Calibration →
Magnet integrity test/calibration testStarted by tharinduth, 05 Jun 2017 magnet, integrity, calibration and 4 more... |
|
0 members, 1 guests, 0 anonymous users