Guidance material for starting SQF implementation
Hi, I am just starting the process of implementing SQF. I have downloaded the guidance checklist off the sqf website. There are columns titled "Primary Response", "Evidence" and "Supplier Onsite Correction/ Corrective Action". Can anyone help me better understand what belongs in each column? An example using one of the clauses (such as approved supplier program) would be very helpful. Thanks
hi
do you have a HACCP plan already in place?
hi
do you have a HACCP plan already in place?
Yes we do
beautiful
The language is really for auditors, but for you here's what I would do
Primary response would be the portions of your existing plan that cover the pre req from SQF
so garbage/waste as an example---------you would just copy/paste what you already have and then insert the SOP name and # in the evidence column once your sure the program you have covers the SQF requirement (adjust if needed)
once you've gone through your whole existing program---you may or may not have any blank rows---essentially you've just completed your gap analysis and will know what you're missing!
Say what you do, do what you say - prove it.
Primary is what your answer is to the question
Evidence is the proving part - such as... has a fully developed RECALL plan including all needed sections, team listing, etc. (example only)
The last stop is what is your corrective action for items that are not present, inadequate, etc.
Suggest if you have not already done so, have an outside consultant conduct an SQF GAP for you.
beautiful
The language is really for auditors, but for you here's what I would do
Primary response would be the portions of your existing plan that cover the pre req from SQF
so garbage/waste as an example---------you would just copy/paste what you already have and then insert the SOP name and # in the evidence column once your sure the program you have covers the SQF requirement (adjust if needed)
once you've gone through your whole existing program---you may or may not have any blank rows---essentially you've just completed your gap analysis and will know what you're missing!
Say what you do, do what you say - prove it.
Primary is what your answer is to the question
Evidence is the proving part - such as... has a fully developed RECALL plan including all needed sections, team listing, etc. (example only)
The last stop is what is your corrective action for items that are not present, inadequate, etc.
Suggest if you have not already done so, have an outside consultant conduct an SQF GAP for you.
Thank you for the response. I plan on approaching my manager and asking for an SQF consultant to come, however I was thinking it might be more beneficial if I start with an internal GAP and try to fill in the holes myself first, so when the consultant comes they can give more specified critiques (other than pointing out that I'm missing something entirely).
Do you have any insight on how to interpret element 9.1.7.1 for equipment and utensils.
Specifications for equipment and utensils and procedures for purchasing equipment shall be documented and implemented.
Do we need a specification for each piece of equipment?
a general spec will work
ACME food will only procure equipment that is........................fill in the blanks stainless steel, capable of withstanding repeated cleaning etc etc----take the language right out of the code!
Are you a FSEP CFIA regulated commodity currently? Has CFIA audited your PCP plan?
a general spec will work
ACME food will only procure equipment that is........................fill in the blanks stainless steel, capable of withstanding repeated cleaning etc etc----take the language right out of the code!
Are you a FSEP CFIA regulated commodity currently? Has CFIA audited your PCP plan?
What Scampi said! Our equipment/utensil policy reads pretty much like that (with a list of items taken directly from the code).
Thank you for the response. I plan on approaching my manager and asking for an SQF consultant to come, however I was thinking it might be more beneficial if I start with an internal GAP and try to fill in the holes myself first, so when the consultant comes they can give more specified critiques (other than pointing out that I'm missing something entirely).
........................
The beauty of having an experienced SQF consultant handle the gap is the person will pinpoint issues and then go about assisting you in understanding and correcting.
It is an Auditor acting as a highly experienced reporter that will point out the issues and not provide consulting - they are two separate things.
Personally as a long time consultant that was an SQF Auditor prior, I like doing gaps that are raw and not picked over by well meaning eyes, because in-place eyes will miss things, etc.
Hello,
9.1.7.1 Specifications for equipment and utensils and procedures for purchasing equipment shall be documented and implemented. what kind of document do I need?
Thanks,