What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Type of Gloves for handling Frozen Products

Started by , May 12 2021 06:15 PM
3 Replies

Recently we have been having problems with foreign matter of particles from Nitrile Gloves which are used by our Food handlers. Are there any other type of gloves that can be used in handling Frozen products during packing? Which seems to tear unnoticeably. And what do you recommend as a Control Measure?

Share this Topic
Topics you might be interested in
Type of migration test suitable to test on repeat used of HDPE Plastic for steaming How do you determine parameters and what type of testing needs to be completed by a lab for your finished product? What K type thermocouple has worked best for you? Additional Product (same recipe with original product but packed in different packaging type) Are fiberglass type panels allowed to be used as an insulation material in a cold room?
[Ad]

Hi,

 

I can recommend MAPA Proffesional  Gloves, they have a really good range of different type of gloves approved to be used in Food Sector. I would check them out first.

 

Food industry | MAPA Professional (mapa-pro.co.uk)

 

Other that I know of:

Supertouch Blue Fish Scale Gloves - 500 Pack | Workwear101

 

Grippaz Nitrile Food Safety Gloves - SafetyGloves.co.uk

 

 

Hope this helps. 

1 Like1 Thank

certain you don't want to order from Canada, but this is a good resource of what glove type in different environments

https://www.superior...ocessing-gloves

1 Like1 Thank

Hello:

 

We are a frozen berry operation and use disposable nitrile gloves which are changed out at least every 2 hours.

"Pre-Covid" - we had a reliable source of 4.5 mil gloves which held up well.

However with the scarcity of PPE over the past 14 months we have received some which are lighter weight i.e. 3 mil and also some blended with vinyl.

Both of these type do tear much easier and need to be replaced more often, and I have made sure not to purchase any more!

 

As I am sure you are aware, you want to stay away from latex - so I would focus on the quality of the nitrile for my corrective action.

 

Our control measure has been short shop floor type training sessions to keep everyone focused on the risk of this type of contamination.

 

Hope this helps.


Similar Discussion Topics
Type of migration test suitable to test on repeat used of HDPE Plastic for steaming How do you determine parameters and what type of testing needs to be completed by a lab for your finished product? What K type thermocouple has worked best for you? Additional Product (same recipe with original product but packed in different packaging type) Are fiberglass type panels allowed to be used as an insulation material in a cold room? What is the best type of auditing scope for a distribution center? Validation of Filter (Bag-Type and/or Cartridge) Do you perform a root cause analysis for any type of deviations and identify preventive actions? Certificates of Analysis for retail type ingredients What type and size of test strips do you use to check and calibrate the metal detector?