Can anyone suggest a good repair for cracks in a blast freezer cement floor?
Hi I am getting ready for another audit but since our last audit the cement flooring in our blast freezer has had some cracks form. Does any one know or could suggest a good repair or epoxy coating for this? Thanks, Willis
are you able to empty it and let it warm up and have the time for the repair to properly cure?
If cracks are small enough you can use floor crack repair. There are some options out there that even set and cure in freezer conditions. You may want to get some input from a company who specializes in floor repairs, floor coatings.
Thanks Glenn, this looks like exactly what i need and should work for our freezer.
IMEX this is an expert job and involves (a) shutting down, (b) digging up the floor, © filling with low temperature compatible cement and (d) several days to fully set.
Regardless, Good Luck with the magic epoxy !
Not all cases Charles. It depends on the size of the crack and overall floor condition. I've had a lot of success with epoxy patching in freezers and coolers. The biggest mistakes people make are selecting the incorrect product, and not allowing it sufficient time to cure since at colder temperatures it takes longer to cure to allow full traffic.
What Glenn posted is the right material for the application. It allows setting as long as 10 below F.
IMEX this is an expert job and involves (a) shutting down, (b) digging up the floor, © filling with low temperature compatible cement and (d) several days to fully set.
Regardless, Good Luck with the magic epoxy !
Not all cases Charles. It depends on the size of the crack and overall floor condition. I've had a lot of success with epoxy patching in freezers and coolers. The biggest mistakes people make are selecting the incorrect product, and not allowing it sufficient time to cure since at colder temperatures it takes longer to cure to allow full traffic.
What Glenn posted is the right material for the application. It allows setting as long as 10 below F.
Hi Ryan,
Yes, totally agree. Every case is special. Also may relate to what the business is.
The "expert" we engaged warned us that quite often the full problem is not easily visible from external observation but penetrates deeper such that in a short while a limited surface treatment will fail at the freezing temperatures involved (air temp. can be down to -30degC).
https://www.tufcoflo...ialty-products/
They have other specialty products to assist with specifically blast freezers. I have them in our plant, and they are wonderful!
Yes, correct. If there has been or is water intrusion then it needs further evaluation. For floors that are older and have been through more traffic this is more problematic to be certain. However, if flooring is newer, recently refinished, or traffic is not as heavy then the surface issues are more than likely just surface issues. The real bugger though is water so if there is evidence of water damage or water intrusion that's definitely the time to bring in experts to further evaluate.
Hi Ryan,
Yes, totally agree. Every case is special. Also may relate to what the business is.
The "expert" we engaged warned us that quite often the full problem is not easily visible from external observation but penetrates deeper such that in a short while a limited surface treatment will fail at the freezing temperatures involved (air temp. can be down to -30degC).
Look here:
https://www.tufcoflo...ialty-products/
They have other specialty products to assist with specifically blast freezers. I have them in our plant, and they are wonderful!
Thanks again but I do not see any mention of specific products suitable for (very) low temperature applications.