Jump to content

  • Quick Navigation
Photo

Is it OK to share our Food Safety Plan with customers and state agencies?

Share this

  • You cannot start a new topic
  • Please log in to reply
2 replies to this topic
- - - - -

erodart1

    Grade - Active

  • IFSQN Active
  • 9 posts
  • 1 thanks
1
Neutral

  • United States
    United States

Posted 13 March 2020 - 06:02 PM

Hello All, 

Need some guidance and I'm hoping someone could with this.  We've recently had request from customers and state agencies if we can provide a copy of our food safety plan. Obviously, if it was an in-person visit we would show them our plan but how would one handle if they are asking this information via email?  Is this okay to share?, is there something else that can be provided?   Any guidance would be greatly appreciated. 

 

Thank you



SQFconsultant

    SQFconsultant

  • IFSQN Fellow
  • 4,834 posts
  • 1163 thanks
1,197
Excellent

  • United States
    United States
  • Gender:Male
  • Interests:Home now on Martha's Vineyard Island/Republic of these United States

Posted 13 March 2020 - 06:30 PM

You can issue a declaration that you have this - such as we are compliance with HACCP and have a HACCP plan that is available for review at our facility.

 

Or you can simply send a copy of it.

 

Since running an approved supplier project for a client where we asked each one for a copy of it - we had about 80% of 100 send it out, 10 balkers and 10 that sent declarations.


All the Best,

 

All Rights Reserved,

Without Prejudice,

Glenn Oster.

 

Glenn Oster Consulting, LLC

Consulting on: SQF Food Safety System Development, Implementation & Certification

eConsultant Retainer | Internal Auditor Training | Corrective Action Avoidance | XRP & XLM

 

Vineyard Haven, Martha's Vineyard Island, Massachussetts

Republic of these United States (restored)
 

www.GlennOster.com | 774.563.6161 | glenn@glennoster.com
 

 

 

 


erodart1

    Grade - Active

  • IFSQN Active
  • 9 posts
  • 1 thanks
1
Neutral

  • United States
    United States

Posted 13 March 2020 - 06:35 PM

Thank you. This is probably for a different thread but under the FSMA regulation, if a distribution facility is not registered through the FDA they are not required to comply to subpart C of the PCFH rule correct?  You would still be required to comply to subpart b Current Good Manufacturing Practices.  





Share this

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users