Request - Please identify PRP/OPRP/CCP
Hi..
sir,
i need your help, this is HACCP certified company & i m recently joined
i have 8 CCP in our company as per below
1.Receiving of raw material
2.Storage of raw materials
3.Thawing/Defrosting
4.Disinfection/Sanitation
5.Cooking
6.Boiling/Sugar syrup
7.Cooling & storage
8.Distribution/Delivery
I have never-ever seen 8 CCP any other comp, pls help who CCPs should be remove form here.
Hi Vinit,
Thks for yr query and Welcome to the Forum -
In order to give useful replies, a little more info.would be helpful -
Product, RTE or not ?
Process ?
Particular HACCP standard if any, eg iso22000, BRC etc ?
8 CCPs is extremely high and it does seem like it's not correct.
Along with the information requested above to some extent it's best to understand also are you FSSC certified or did you come from an FSSC facility?
I ask because you used the term oPRP and nobody ever uses that if they don't need to or aren't conditioned to use it.
8 CCPs is extremely high and it does seem like it's not correct.
Along with the information requested above to some extent it's best to understand also are you FSSC certified or did you come from an FSSC facility?
I ask because you used the term oPRP and nobody ever uses that if they don't need to or aren't conditioned to use it.
Sorry that should read 8 CCPs is extremely high and doesn't seem like it's correct.
Again it would be nice if I could edit my posts so there isn't any confusion when I typo.
Most of the 8 look like PRPs more than CCPs, but more inforamtion is needed.
Important does not mean critical.
It is important to have clean storage areas but it may not be a critical control point.
Hello Vinit, as you know a CCP is the result of a hazard analysis being done and is the resulting control of the known and scientifically verified hazard at the point where it occurs. Most of the listed activities should be covered under GMP's or prerequisites for food safety such as truck inspection, sanitation and allergen storage. That is to say that, for example, IF there is not a known hazard in the receiving of a material then, there is nothing to monitor and control. An example of a situation that would rise to the level of a CCP would be like a process where a motor is over a food contact packaging machine and during the hazard analysis you see a hose hanging out over the film that is deemed to be brittle and loose. So, I rated the risk on a 1-5 scale based on the likelihood of occurring and 1-5 on the severity of the resulting failure. Our HAACP team felt that the likelihood of occurring was a 5 (just a matter of when) and the resulting hazard to be a 3 out of 5 when it happened because the oil is food grade and package will have to pass through a metal detector. So, it was further decided that this threat could be reduced by placing a drain pan and a drain hose to the outside area. Of course this would have to be monitored and at a certain frequency and so on. Also, the threat could be eliminated totally by installing a different type of motor or positioning it in an area away from the film. While the truck inspection and delivery is important, it does not reduce or eliminate any known hazard. I call it a CP and not a CCP because we don't want dangerous or hazardous materials coming into the plant but, here again the CP addresses the possibility of an issue and not a KNOWN hazard or CCP. I hope this helps you.
Taste Maker